Matters Needing Attention For Fly Ash Dryer

Check the internal temperature of the fly ash dryer on time, Fly Ash Dryer and then accurately determine the internal temperature of the fly ash based on the change trend of the internal temperature of the fly ash,Fly Ash Dryer and use this as a basis to control the increase in external fuel. Ensure that the increase in external fuel is carried out in accordance with repeated guidelines,Fly Ash Dryer to prevent more or less fuel increase from forming a temperature rise that does not meet the specifications or may not be completely burned.

Pay attention to the change in the calorific value of the fuel in the fly ash dryer, in turn,Fly Ash Dryer based on the appropriate increase in the external fuel of the fly ash dryer,Fly Ash Dryer if the calorific value of the currently used fuel is higher than the heat generated by the original fuel incineration,Fly Ash Dryer then Reduce the amount of fuel increase,Fly Ash Dryer otherwise increase the amount of fuel added to the fly ash dryer,Fly Ash Dryer adhere to the balance of heat in the fly ash dryer.

The reasonable control of the air sluice of the fly ash dryer is to adjust the ventilation in the fly ash dryer. When the ventilation in the fly ash dryer is too large,Fly Ash Dryer the air gate should be lowered in time to ensure that all the firing belts operate in a positive pressure environment. If necessary,Fly Ash Dryer the air intake at the bottom of the billet stack should be controlled to reduce the back air. After lowering the damper,Fly Ash Dryer the dry fuel with low moisture content is added to the fly ash dryer equipment. After the temperature in the fly ash dryer recovers,Fly Ash Dryer the damper is gradually improved,Fly Ash Dryer and the front fire is carried out and the fly ash is dried. Ventilation in the machine accelerates the burning of fuel and improves the heat in the fly ash dryer. When the ventilation is too small,Fly Ash Dryer it is necessary to increase the height of the air gate so that the front of the burning belt is in a negative pressure environment and the rear is under a positive pressure environment to calcine the material. The air intake of the heat preservation orientation and the cooling orientation should be adhered together to improve the burning quality and heat exchange power of the fuel and eliminate the underfire phenomenon in the fly ash dryer.

According to our inquiry,Fly Ash Dryer the above three methods have been adopted,Fly Ash Dryer and the "underfire" problem of the fly ash dryer has been effectively dealt with. If you are still troubled by your own dryer always showing "underfire" problems If you can,Fly Ash Dryer you can try our method, which is useful for all tumble dryers.