Requirements For Four Transmission Devices Of Yellow Sand Dryer

The requirements of the four transmission devices of the yellow sand dryer are as follows: the dryer rotates at a low speed, Yellow Sand Dryer but the speed of the transmission motor is relatively high, Yellow Sand Dryer so the transmission system deceleration is relatively large, Yellow Sand Dryer so the deceleration system of the dryer must be properly selected; The appearance and weight of the product are large, Yellow Sand Dryer and a large circumferential force will be generated on the low-speed gear, Yellow Sand Dryer so you must pay attention to the request for high speed ratio and high torque to the parts; when the dryer is started, it is not only necessary to suppress between the idler shaft and the bearing The conflicting torque of the rotor should also suppress the moment of inertia of the rotor and the material, Yellow Sand Dryer so the motor with a large starting torque should be selected;

Pay attention to the time required for the material to complete the physical and chemical changes in the dryer equipment. Yellow Sand Dryer The transmission device is one of the primary components of the yellow sand dryer. In order to ensure the safe operation of the dryer for a long time, Yellow Sand Dryer in addition to the request to ensure that the sand is horizontal, Yellow Sand Dryer rigid and flexible, the smooth and reliable transmission is a major condition. The above four points are the plea for the attention of the yellow sand dryer transmission device. I hope that the above introduction can help us! The advantages of the yellow sand dryer are large production capacity, Yellow Sand Dryer wide application scale, small flow resistance, Yellow Sand Dryer large scale operation and easy operation.