Views: 0 Author: Site Editor Publish Time: 2020-05-08 Origin: Site
easure technical parameters regularly, such as flue gas volume, temperature, concentration, etc.Pulse Bag Filter if abnormalities are found,Pulse Bag Filter the reasons should be found and dealt with in time. The management personnel should understand the principle,Pulse Bag Filter function and operating conditions of the dust collector, and grasp the adjustment and repair methods. The oil-water separator in the gas storage tank and the air source triplet should be drained once per shift,Pulse Bag Filter and the oil-water separator should be cleaned every 3 to 6 months. The oil mist device should always check the oil storage status and refuel in time. The electromagnetic pulse valve should be removed in time if there is any problem,Pulse Bag Filter if there are impurities or moisture inside,Pulse Bag Filter it should be sorted out, and if the diaphragm is damaged, it should be replaced in time.
During normal operation of the bag pulse dust collector, the ash discharge equipment cannot stop the operation,Pulse Bag Filter otherwise, the dust will soon accumulate in the hopper and cause the overflow into the bag room,Pulse Bag Filter forcing the dust collector to stop the operation. During shutdown, after the technical system is stopped,Pulse Bag Filter the dust collector and exhaust fan should continue to operate for a period of time to prevent moisture and dust in the dust removal equipment.Pulse Bag Filter It is necessary to pay attention to the need to repeat the dust collector when the dust collector stops working Dedusting (manual dedusting can be used),Pulse Bag Filter the dust on the dust filter bag is removed to prevent the bag from being affected by moisture.