How To Maintain The Yellow Sand Dryer？

The protection and maintenance of the machine is an extremely important and regular operation. Yellow Sand Dryer It should be closely coordinated with extreme operation and maintenance, Yellow Sand Dryer and should be inspected by full-time personnel. When the dryer is transported by the manufacturer to your production site, Yellow Sand Dryer you must first check the dryer routinely to see whether it is the machine you purchased and whether it is damaged or unavailable during transportation. If you have any questions, Yellow Sand Dryeryou should immediately take photos and contact the manufacturer.

Before the dryer, Yellow Sand Dryer you should determine the orientation of the dryer equipment. The orientation of the dryer equipment should consider the location of the transportation channel, raw material turnover, Yellow Sand Dryer water inlet, Yellow Sand Dryer steam inlet and sewer pipeline. Here you are reminded that the dryer should be equipped with the dehydrator. Yellow Sand Dryer Dryers and other equipment together, reduce the distance between these equipments, to avoid the subsequent various troubles due to improper selection of orientation. The dryer is classified as one of the larger and heavier drying equipment, Yellow Sand Dryer so the machine should be on a solid foundation, and the level must be maintained together to avoid equipment operation due to site selection and uneven grounding of the equipment. There is a big sensation, Yellow Sand Dryer which affects the drying efficiency and the service life of the dryer.

Refer to the description of the operation of the dryer, Yellow Sand Dryer find the door of the electrical control cabinet of the dryer according to the relevant content in the clarification book, Yellow Sand Dryer and connect the 380V three-phase power line and the neutral line according to the label on the terminal (the need to remind here is: the dryer It is necessary to use 380V electricity to prevent access to low voltage or high voltage). Refer to the label of the dryer body to clarify the corresponding access to the water inlet pipe and steam pipe. If there is no steam condition, Yellow Sand Dryer the steam inlet can be blocked. If the steam heating function is used, Yellow Sand Dryer please install the pressure indicating equipment and safety equipment in the prominent place of the main steam pipeline outside the machine.