Yeast Production Waste Dryer Principle:
The time of the Yeast Production Waste Dryer heating process can be short to only a few minutes. The ingredients in the materials in the drying process are exposed at a gentle heating temperature, which can reduce the component loss of the material, and the product has a good sensory quality. Spray drying, as a process of indirect drying, the product does not directly contact the heat transfer medium, and there is no cross -pollution; the state requirement of the dry material is not high; the processing water is in circulation use, and the heat is mainly transmitted to the material through infrared radiation, which improves energy utilization rate.
Yeast Production Waste Dryer Drying conditions:
The factors that restrict dryness on Yeast Production Waste Dryer include air inlet temperature, exhaust temperature, air humidity, dry air volume, material liquid treatment, water evaporation, dry room diameter, dry room volume, particle diameter.
When designing the above factors, according to the characteristics of dry materials, the particle size and processing of the required product are determined, especially the diameter and volume of the dry chamber. Because they are indispensable factors, it is not possible to make too many adjustments based on this. Therefore, before the design of the Refractive window dryer, it is very necessary to select appropriate drying conditions on a small test machine.
Yeast Production Waste Dryer Application advantages:
Suitable for paste, mud-shaped liquid material, especially the drying effect of thermal material.
1. Compact equipment, small volume, high production efficiency, and continuous production.
2. Drying strength, low energy consumption, and high thermal efficiency.
3. Fast drying speed, short material staying time, and high drying quality.
4. Gentle and fast drying process, retain the original product effective ingredients, and have the same quality effect as frozen and dry. The drying speed and cost are only one tenth.