Waste dehydrator

Waste dehydrator is for three industrial waste materials，including starch, cellulose, and sugar.

It can be focused on dehydration of residue treatment of cellulose biomass (agricultural and forestry waste and urban solid garbage).

Industrial organic matter drying and dehydration constraints:

Restrict factors of waste drying and dehydration are air inlet temperature, exhaust temperature, air humidity, dry air volume, material liquid treatment, moisture evaporation, dry room diameter, dry room volume, particle diameter.

When designing the above factors, according to the characteristics of dry materials, the particle size and processing of the required product are determined, especially the diameter and volume of the dry chamber. Because they are indispensable factors, it is not possible to make too many adjustments based on this. Therefore, before the design of the spray dryer, it is very necessary to select appropriate drying conditions on a small test machine.

Advantages of industrial waste drying and dehydrating machine:

1) Use circular thermal water as a heat source to improve drying efficiency;

2) The dry conditions are mild, the product temperature is relatively low, and it is maintained at about 70 ° C;

3) Operation under low temperature and normal pressure can well retain the color and nutritional ingredients of the product, reduce the oxidation degree of the product;

4) The drying time is about 3 to 5 min;

5) Most liquid materials can be dried without non-sugar carriers;

6) Use modular design to operate continuously;

7) Low energy consumption.