Working principle and technical characteristics of heat pump Wood Chip Dryer problem

At present, due to the country's increasing emphasis on environmental protection,Wood Chip Dryer traditional coal-fired boiler dryers were once out of service. Our company is now introducing a new heat pump wood dryer for this situation,Wood Chip Dryer which can save energy, save electricity and maintain the environment. So, everyone will question the components,Wood Chip Dryer working principle and technical characteristics of the dryer. Today I will answer for you.

What are the components and working principles of the heat pump wood dryer? The main components of the dryer are: compactor, fan, evaporator, liquid storage tank, filter,Wood Chip Dryer shrink valve, AC (wind cabinet),Wood Chip Dryer etc. Its working principle is: when dry, the air stops the closed circulation between the dry room and the heat pump dryer. The heat pump dryer cools and dehumidifies the humid air in the drying room. When the humid air flows through the heat pump evaporator,Wood Chip Dryer the internal The low-pressure refrigerant absorbs the heat of the air from a liquid state to a gas state, Wood Chip Dryerand is sent to the condenser after being boosted by the compressor. When the dehumidified dry cold air flows through the condenser,Wood Chip Dryer the internal high-pressure refrigerant releases heat due to condensation,Wood Chip Dryer and the external air is heated to hot air and returns to the dry room to continue the dry items. The high-pressure refrigerant liquid flowing out of the condenser is reduced in pressure by the shrink valve and then flows into the evaporator to continue the next cycle.

What are the technical characteristics of heat pump wood dryer?Wood Chip Dryer Low drying temperature. The heat pump drying technology consumption process is about 38-52℃ lower than the traditional drying technology,Wood Chip Dryer that is, the heating temperature of the heat pump drying technology is about 37℃,Wood Chip Dryer and the energy is low. Because the heat pump drying process uses air circulation, the heating temperature is low, the drying time is shortWood Chip Dryer, and the capacity is large, so the heat pump drying process consumes less energy and is a better energy-saving product.

The drying quality is good.