Beef Jelly Dryer

1、 Overview of gelatin

Gelatin is a large molecule hydrophilic colloid that is the product of partial hydrolysis of collagen. According to their properties and uses, they can be divided into photographic gelatin, edible gelatin, and industrial gelatin. The quality requirements for gelatin vary depending on their use. When used as an adhesive, the main requirement is adhesive strength.

2、Overview of Beef Jelly Dryer

Beef Jelly Dryer uses 95 ℃ hot water as the drying medium to perform Refractive window drying on liquid paste materials. The moisture content is dried from 90% to 5%, and the drying time is only about 5 minutes. However, conventional heat pump drying, hot air drying, and freeze-drying require more than 12 hours or even longer. Therefore, when the liquid paste material is dried, it can maintain 94% vitamin C and natural color, nutrition, flavor, and aroma. The quality of the products it produces is comparable to that of freeze-dried products, but the energy consumption is less than one-tenth of that of freeze-dried products.

3、Beef Jelly Dryer Scope of Application

After testing and production, the liquid paste material refractive window dryer is the most suitable for heat sensitive materials, mainly including:

Vegetables: spinach, asparagus, tomatoes, Broccoli, pumpkin, etc

Nutrients: Spirulina, blue-green algae, seaweed, barley grass juice, yeast, etc

Beverages: coffee, tea, etc

Waste: soybean residue, muddy materials, etc

4、Beef Jelly Dryer Drying conditions：

The factors that restrict dryness on Beef Jelly Dryer include air inlet temperature, exhaust temperature, air humidity, dry air volume, material liquid treatment, water evaporation, dry room diameter, dry room volume, particle diameter.

When designing the above factors, according to the characteristics of dry materials, the particle size and processing of the required product are determined, especially the diameter and volume of the dry chamber. Because they are indispensable factors, it is not possible to make too many adjustments based on this. Therefore, before the design of the Refractive window dryer, it is very necessary to select appropriate drying conditions on a small test machine.